CVEN 250 Exam 1
In AutoCAD Civil 3D, ________________ are used to add text to blocks, which can
then be extracted for further analysis.
- A. Properties
- B. External References
- C. Aspects
- D. Attributes
- E. None of the above - CORRECT ANSWER-D - Attributes
In AutoCAD Civil 3D, which command is used to draw a connected sequence of lines
that can be created straight, curved, or tapered?
- A. Polylines
- B. Multilines
- C. Arraylines
- D. Varilines
- E. None of the above - CORRECT ANSWER-A - Polylines
Which two dimensions are shown in both the top and bottom views in orthographic
projection?
- A. Height and Width
- B. Width and Length
- C. Width and Depth
- D. Height and Depth
- E. None of the above - CORRECT ANSWER-C - Width and Depth
(True/False) Height and Depth dimensions are projected from the right side view in
orthographic projection. - CORRECT ANSWER-True
You've asked for a survey of your property and the Surveyor has just sent you a
drawing of your property boundary. You show it to your neighbor and he says that the
boundary between your two properties is wrong. He says his legal description says that
the boundary bears N49-31'56.37"W at 363.591'. He says you shouldn't pay the
surveyor and get him back our to re-survey that line. Who is right if the drawing shows
that the line bears S49-31'56.37"E at 363.591'?
- A. The bearing and distance are correct at "S49-31'56.37"E at 363.591'"
- B. The bearing and distance are correct at "N49-31'56.37"W at 363.591'"
- C. The surveyor must have made a mistake and should resurvey all of the lines
- D. B and C are correct
- E. A and C are correct
- F. None of the above - CORRECT ANSWER-A - the surveyor did not make a mistake;
it is simply another way of writing the bearing. As long as the direction is the exact
opposite, but the values are the same, then it is the same bearing.
