Download CSX CONDUCTOR TRAINING WEEK 1 TEST REVIEW 100% CORRECT QUESTIONS AND ANSWERS and more Exams Training and Development in PDF only on Docsity!
CSX CONDUCTOR TRAINING WEEK 1 TEST REVIEW
100% CORRECT QUESTIONS AND ANSWERS
Who is Responsible for making Pay Claims? Ranking Employee or Employee to be paid What is the Hand Signal for Reduce Speed? Arm out horizontal over the track Which of the following are allowed by the Rulebook? Always take the safe course What is the Hand Signal for Release Air Brakes? Hand held overhead when Equipment is Standing Who authorizes a Utility Employee to join an Assigned Crew? Ranking Employee What is the normal position for a switch or derail? In the "on" or derailing position Before lining a switch or derail, an employee must?
- Ensure that any preceeding movement has passed clearance points. 2) Ensure that the device is not locked, spiked, or tagged "out of service" If a lock is found to be defective or missing on a main line switch or derail an employee must?
- Report device to Trainmaster/Dispatcher. 2) Be governed by the instructions of said Dispatcher/Trainmaster
When an Employee determines that a switch or derail is defective, the employee must?
- Not operate the device. 2) Report device to Proper Authority You are standing in a yard using multiple switches on long shoves. After lining each switch an employee should check what? That all switch points are flush and aligned properly. When using a portable radio in a shove move, Employee instructions must specify what?
- Employee is clear of all tracks. 2) Switches and Derails are all properly aligned for the move What is a System of Tracks, other than main tracks and sidings, used for making up trains for storing cars and other purposes? Yard By Definition, what is the location in a turnout where it is unsafe to pass on an adjacent track? Clearance Point What is a track connection between two adjacent tracks, not necessarily parallel, consisting of two switches whose primary purpose is to allow crossing from one track to another? Crossover What is a device of "Necessary Track" used to change from one track to another? Switch
Employees are prohibited from using alcohol...
- On duty, or reporting for duty. 2) on CSX Property, Vehicles, or facilities provided by CSX When working with air hoses, which of the following apply?
- Do not extend over the drawbar when adjusting hoses. 2) make certain that BOTH anglecocks are closed before adjusting hoses with hands. When handling a EOT device, an employee must...
- Secure EOT air hose by s hook if available. 2) Do not place the EOT where it may become a tripping hazard When lifting objects what safety steps must be taken?
- Never use Excessive Force. 2) Assume a balanced posture. Your Coworker is acting in an unsafe manner, what should you do? Warn the employee of their unsafe behavior When must an employee report an injury? Immediately or prior to leaving CSX Property. What hazards must be avoided when performing tasks?
- Pinch Points. 2) Excessive Force When is CSX Ear Protection required?
- when within 100' of a locomotive in any position other than idle. 2) When providing flag protection at a crossing or grade. when outside of an office environment, boots must have what? Oil Resistant Soles When are CSX Safety Glasses required?
- When on or about tracks or equipment on tracks. 2)when riding in a locomotive with the windows open whenever possible, how must air hoses be separated? After closing "Appropriate Anglecock" allow train movement to separate hoses If couplers are not aligned, how much space is required between the cars before they can be safely adjusted? 50' When using a radio, what features are required?
- Chest type radio harness. 2) Holster or radio clip with lapel mic When applying a side mounted hand brake, an employee must have stable footing and what?
- Be facing the car. 2) Use one hand to operate the brake, and the other hand placed firmly on the car Hours of Service 1545 1100 How much rest is required after 10 hours of work? 10 hours what is the maximum amount of time allowed in train service? 12 hours when mounting the side of a moving car, employees must, face the car, maintain 3 points of contact, and what? Place the defined heel on the bottom rung and brace feet on the side rails Define "Limited Speed"
Whenever on duty Employees must know and comply with the rules, instructions, and procedures that govern duties. They must also comply with the instructions of a Supervisor or Trainmaster/Yardmaster. In the event of a conflict, what should an employee do? Take the safe course When using equipment other than remote controls, what speed is not to be exceeded when coupling cars? 4 mph What is true about train speeds? They must not be exceeded Whenever dealing with a conflict between two speeds, which speed should be chosen by the conductor? The lowest speed You are operating a single locomotive through a receiving yard and you are operating at restricted speed. What speed should not be exceeded? 10 mph its a yard What is the speed that permits stopping at half the range of vision. Permitting a stop short of a train, car, obstruction, on-track equipment, stop signals, derails, and improperly lined switches. Also permits looking for BROKEN RAIL Restricted Speed Your train left the main track through a hand thrown switch into a non-signaled yard. What speed is not to be exceeded?
10 mph The Appearance of a fixed signal as viewed from the direction of an approaching train Signal Aspect The information conveyed by the aspect of a signal Signal Indication A block signal equipped with a number plate, a G marker, or a P marker that conveys Restricted Proceed as the most restrictive aspect Intermediate Signal A color light, color position light, or semaphore signal that conveys Stop as its most restrictive speed and does NOT have a P marker, C marker, APP marker, or a G marker Absolute Signal Train speeds are authorized by the Operating Rules, Special Instructions and...?
- Signal Indication. 2) Dispatcher Message Unless otherwise specified, speed restrictions apply to the ___________ Train Entire What must and employee receive before occupying a controlled track? Dispatch Bulletin and Release Form You are on the Q31715 train, on duty at 0700, your release form is 3 Hours and 57 Minutes old. What action is required? None
Dispatcher Bulletin A computer-generated form advising of a dispatcher bulletin number and the number of messages it must contain. Its address must correspond to the associated dispatcher bulletin. Release Form You are on the Q31715 train on duty at 1500. the time on your release form is 10:30, what action is required? Contact Dispatcher A form used to record specific instructions or dispatcher messages from the train dispatcher regarding movements on controlled track Form EC- 1 You are on the Q31715 train, upon arriving you obtain a dispatcher bulletin that does not contain your engineers name or ID. What action is required? Contact Dispatcher and confirm Bulletin Number Where are Temporary Track Restrictions designated?
- Dispatcher Messages. 2) Form EC- 1 Where are Permanent Track Speeds designated? Special Instructions Who may instruct you to leave your initial terminal without Train Documentation? The Chief Train Dispatcher You are relieved before reaching your final destination. What must you do with any CSX Train Documentation? Leave it on the Head locomotive in a location where it will be easily found
When handling a Multiple Unit consist with no cars, what speed must not be exceeded? Freight Train Speed When a train dispatcher transmits a release form verbally, a conductor must what? Repeat the bulletin number and confirm the number of messages If the engineer exceeds authorized track speeds, what action is required?
- If exceeding authorized speeds by less than 5 mph, Instruct your engineer to slow down. 2) If exceeding by more than 5 mph, instruct your engineer to stop the train. If no action is taken conductor must stop the train and report. How far in advance of a speed restriction should a conductor warn his/her engineer? No less than 2 miles before restriction, but no more than 5 miles. A computer-generated or hand-written document consisting of tonnage graph, Restricted or special handling list, CT-168, Hazmat forms, and train listing and Hazmat Endorsements CSX Train Documentation Which of the following are considered Special Instructions?
- Timetable. 2)System Bulletin T/F When recrewed at a point other than a designated recrewing point, the new crew must contact dispatcher prior to any move. True What speed must not be exceeded at "Limited Speed"
If a switch or derail is difficult to operate, an employee must not operate the device and....?
- Report the device to the proper authority. 2) attach a bad switch tag. What is true about Authorized Train Speeds
- They must not be exceeded. 2) They must be observed even if wayside signs are not properly displayed Which of the following correctly ID the ends of a railcar?
- If the railcar has only 1 handbrake, the end with the handbrake is the "B" end. 2) If the railcar has multiple handbrakes, the letters "A" and "B" will be stenciled onto the railcar frame A substance or material in railcars or containers in railcars for transportation that the Secretary of Transportation has determined to be capable of posing an unreasonable risk to health, safety, and property when transported in commerce. Hazardous Material (Hazmat) When do you need to use a Hazmat Switching Chart?
- When moving placarded hazmat in a yard or industry. 2) when making a pick-up or set-out in a customer facility When must boxcar doors be closed and latched? 1)Before adding to your train. 2) Before departing customer facility Any shipment that exceeds a published clearance limitation for the specified route of movement and/or requires specific operating handling procedures for safe movement. Clearance Implicated Shipment
You are instructed to pick up a cut of 30 loaded coal cars from a customer and add them to your train. Where must these cars be located in your train? At the head of your train, directly behind the locomotive/s When moving a Clearance Implicated Shipment within a yard without Clearance Bureau Authorization, where must the Load be located? Where the crew can observe the load Loaded Auto-Rack cars must be not be placed in a train behind what?
- Open top cars loaded with stone, coal, or gravel. 2) Open top cars loaded with sand When must the doors of a railcar equipped with plug doors be closed? Before any movement
